Last Updated on September 17, 2022
In case you are not carrying your keys, you can try unlocking the doors with a tennis ball. Insert the ball into the top corner of the side door, blow it to create an opening, and squeeze it through to the unlock button. Make sure not to over-expand the cuff because that could damage the door. If the tennis ball is not available, a wire coat hanger works well. Squeeze the hanger through the opening and press the unlock button to release the door.
Using a screwdriver
If you can’t find your keys, the first thing you should do is find a reliable locksmith. While many will come to your home, you can also try a dealer or locksmith. They’ll have specialized equipment and know what to do to get your car running again. If the locksmith you’re using can’t get into your car, they can tow it to a dealership or lockout center.
If you don’t have a key, you may be able to program your key fob to open the car. These newer Buick keys are equipped with a built-in keyless entry system. However, you’ll need to have the key code programmed. This will require a professional locksmith or dealer to perform the procedure. A screwdriver is a simple but effective tool to unlock a Buick Enclave without keys.
If a car door opener doesn’t work, you can try to put a wire hanger or string into the lock. However, be careful not to push too hard as you could damage the locking mechanism. If you’ve forgotten your keys, don’t give up! If you can’t remember the keys, call a locksmith. If you’re unable to find a locksmith in your area, you can try using a key fob cover or case. These will protect your key fob and prolong its battery life. If you’re unable to do this, you can buy them online.
There are several ways to open a buick enclave without your keys. Using a screwdriver is a risky method, and you may end up damaging the car door. Instead, opt for a cheaper and more efficient method: Using a wire coat hanger. Insert the wire into the opening and pull the lever into the lock.
Using a shoestring
For some reason, your car won’t open with your keys. Well, luckily, there’s a simple trick you can try. Instead of reaching for a set of keys, you can use a shoestring to unlock the car door. The shoestring can be used as a lockpick and will work to unlock any car door. However, you’ll have to be patient since it may take you a few attempts to get the lace into the correct position.
Using a shoestring to unlock slammed doors can also work on older cars with manual locking mechanisms. Just tie a slip knot in the center of your shoelace to form a loop about the size of your index finger. Then, wiggle the shoelace around the driver’s door. The back and forth motion will shift the slip knot down the window.
To unlock the car door, first tie the shoelace into a slip knot. You can then pull the two ends to tighten the knot. Next, place the string in the door, holding one end in each hand, and slide it through the door. Then, pull up on the string. This will open the door. If you can’t find a shoelace that fits the doorframe, you can use an air wedge.
If you’re feeling brave, you can also use a tennis ball to unlock the doors. Just insert the tennis ball into the side door and blow it to create an opening. Make sure you don’t overextend the cuff or you’ll risk damaging the door’s mechanism. A wire coat hanger is another excellent alternative to a tennis ball. The wire coat hanger is long enough to fit into the opening and get to the unlock button without damaging the door.
Using a slim jim
To use a slim jim to unlock slammed doors, find a small wedge in the door lock. Slide the slim jim into the wedge and slowly insert it into the lock’s notched end. Make sure to avoid catching the thin jim on anything, especially the wires inside the notch. Once inserted, the slim jim will help you unlock the door.
Before using a slim jim to unlock slammed doors, make sure to check your vehicle’s lock type. If the locks are not the same as those of your car, you could damage your car and cause more damage. You should always use a professional locksmith if you’re unsure of what you’re doing. While locksmiths are expensive, they should be the first option if you’ve locked your keys in your vehicle.
Before attempting to use a slim jim to unlock slammed doors, make sure that the tool matches the model and date of manufacture of your car. The tool is made of spring steel and has the right shape to give it the correct purchase on the hidden locking mechanism. If your car is built after 1999, it may be protected with a shielding. If this is the case, you’ll need to stop using a slim jim and instead try another method.
If you’ve lost your car keys, you may be able to open the door with a thin coat hanger or a modified wire coat hanger. However, be sure to follow all manufacturer instructions carefully. If you don’t know what you’re doing, you could end up with a detached control arm or door that doesn’t open properly.
Using a steel rod
Getting in your Buick Enclave without keys can be an embarrassing experience. Luckily, there are several ways to open the doors, including using a steel rod to unlock the door. In most cases, you can unlock the car’s doors using the top right hand corner. If you can’t get inside your car using a key, you can also use plastic wedges to make a way for the rod to go through the lock switch.
Another method is to use a tennis ball to unlock the door. To do this, you simply insert a tennis ball into the top corner of the door and blow it to create a small opening. The key is not to blow it too hard, however, as this could damage the door. A wire coat hanger may also work, but it can be more difficult to find and will cause more damage.
Using a wedge
To unlock a buick enclave with no keys, start with the door lock. The most common access point is on the top right hand corner. If the lock switch is positioned there, you can wedge a plastic wedge into place and move it toward the switch. You can then push the lever upward to unlock the door lock. Using a rubber wedge in the same place can help you keep the door open.
If you don’t have keys, a small piece of wood or plastic can be used to wedge the lock pull. Using a rybber mallet or the palm of a glove will help you apply enough pressure to move the wedge. Use a wedge that is just wide enough to get under the door lock pull, but not so deep that it bends the door or the glass. Also, be careful not to bend the door or glass, and be sure to wedge the door away from your body at least 1.5 inches. You should also be careful to not damage the rubber weatherstripping on the roof with the wedge.
Alternatively, you can try slipping a wedge between the window and weather stripping. This will allow you to unlock the door without keys. Generally, wedges that are designed for this purpose are similar to the ones you might use for door handles. To make sure you don’t damage anything inside the car, choose a rubber wedge instead of a wooden one.
About The Author
Mindy Vu is a part time shoe model and professional mum. She loves to cook and has been proclaimed the best cook in the world by her friends and family. She adores her pet dog Twinkie, and is happily married to her books.